Esite-Micro Documentation
Esite x10 Installation Guide
Esite x10 Product DescriptionEsite x10 Operations Manual 13.10/12.10Esite x10 Installation GuideEsite Modular Product DescriptionEsite Modular Installation GuideEsite x10 Operations Manual 13.11Esite Modular Operations Manual
Esite x10 Installation Guide
Esite x10 Product DescriptionEsite x10 Operations Manual 13.10/12.10Esite x10 Installation GuideEsite Modular Product DescriptionEsite Modular Installation GuideEsite x10 Operations Manual 13.11Esite Modular Operations Manual
  • eSite x10 Installation Guide
  • Model RSC
    • 1 General Information
    • 2 Safety
    • 3 Description of the eSite x10
    • 4 Prepare for installation
    • 5 Transportation and content
    • 6 Installation
    • 7 Lower Main
    • 8 Site Commissioning
    • 9 Connect load
    • 10 Finish assignment
  • Model RSY
    • 1 General Information
    • 2 Safety
    • 3 Description of the eSite x10
    • 4 Prepare for installation
    • 5 Transportation and content
    • 6 Installation
    • 7 Site Commissioning
    • 8 Connect load
    • 9 Finish assignment
Powered by GitBook
On this page

Was this helpful?

Export as PDF
  1. Model RSC

10 Finish assignment

Previous9 Connect loadNext1 General Information

Last updated 1 year ago

Was this helpful?

To finish the installation, take the following final actions before leaving the site.

1) Slide on the Connection Compartment lid (see figure 10.1). 2) Lock it using a padlock. 3) Make sure the genset is set to Auto mode on the genset control panel. 4) Make sure the battery cabinet door is closed.

5) Make sure the green LED on the Connection Compartment comes on (see figure 10.2). 6) Clean up the working area.

http://www.esitepowersystems.com

Copyright © 2021 eSite Power Systems AB

Figure 10.1. Closing of the Connection Compartment.
Figure 10.2. Green LED indicator on Connection Compartment.